If you are looking to make a clone of an existing pattern, you can watch out tracing wheel video and it shows how to duplicate a paper pattern,
https://www.professorpincushion.com/professorpincushion/tracing-wheel/

ok. You basically want to take one of our pdf patterns and copy it by hand without printing it. That seems like a lot of work. Easiest solution is to go to a thrift store and see if there is a $20 printer you can get. Go to the library, use their printer? Go to a kinkos and print it for a few cents a page.

If money is tight I can respect that. Technically, if you are viewing the pdf in acrobat, you would just need to view the zoom level at 100 percent. You could then put a piece of paper over the monitor and trace it. Im assuming you have a flat lcd monitor and a crt tube monitor which has curvature. I really don’t recommend tracing on your monitor because you could damage it, which will cost you more money than a cheap printer in the long run.

technically A4 is 8.3″ X 11.7″. Letter size is best 8.5×11 (all printers can do this). I made all the patterns to have a .5″ margin from the edge. Just print without scaling the pattern in the print options of the printer and you should be just fine. All of the pieces to a pattern fit on 8.5×11 paper.