Book Promo Banner
Simplicity 1033

Simplicity 1033

Home Page › Forums › Ask A Question › Simplicity 1033

  • This topic has 1 reply, 1 voice, and was last updated 8 years ago by the_professors_assistant.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 12, 2016 at 10:17 AM #51123
    the_professors_assistant
    Keymaster

    Hi!
    Would it be possible to make view A dress into a one pieces instead of two with the princess seam and I where would I make the cuts if both the front and back piece don’t have darts?

    April 12, 2016 at 7:31 PM #51139
    the_professors_assistant
    Keymaster

    Yes, you should be able to make it a one piece dress. You would be skipping the waistband and just be attaching the bodice to the skirt waistline. (because of the corset I can tell if the top extends past the top of the skirt…if so, you may want to shorten the bodice a little bit.) As far as the princess seams for the bodice, you can really put seams where ever you want. Place the paper front bodice over the front of your body and draw a line directly where you want the seam to be. (maybe get a friend to help you.) Then cut the pattern on this line. Wherever you cut the pattern, tape on some paper to add seam allowance and then you can cut your fabric pieces. Hope that helps! good luck! 🙂

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Ask A Question’ is closed to new topics and replies.