Book Promo Banner
Pattern Alteration for the Portly Man

Pattern Alteration for the Portly Man

Home Page › Forums › Ask A Question › Pattern Alteration for the Portly Man

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 13, 2015 at 9:13 AM #45794
    the_professors_assistant
    Keymaster

      Hi Prof Pincushion,
      I am making a tunic for a gentlemen who is a size 4x. I have the patterns largest dimensions at 3x. Which method would be better-slash and spread or the pivot method?
      The largest measurement is around the belly-about 70 inches.

      November 15, 2015 at 4:12 PM #45859
      the_professors_assistant
      Keymaster

        If it were me, I would do the slash and spread method. I think you would get better results in this particular case.

        November 15, 2015 at 4:14 PM #45860
        the_professors_assistant
        Keymaster

          Also, it sounds like what you want to do is pattern grading which is taking a pattern and grading it up to the next size instead of just altering 1 section of a pattern. We don’t have a tutorial but there’s a pretty good article on it here: http://www.threadsmagazine.com/item/4368/making-sense-of-pattern-grading/page/all

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • The forum ‘Ask A Question’ is closed to new topics and replies.