Book Promo Banner
Coat Collar

Coat Collar

Home Page › Forums › Ask A Question › Coat Collar

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 22, 2020 at 10:57 PM #86333
    hhughes458
    Participant

    I am making a duster coat out of Marine Vinyl but the pattern doesn’t give any suggestion on what type of interfacing to use for the collar. Any suggestions?

    Thanks in advance!

    February 24, 2020 at 9:52 AM #86361
    professorpincushion
    Participant

    Type of interfacing is really dependent on the fabric and the care instructions associated with that fabric. For something like vinyl, you typically can’t use heat, like a hot iron, needed for fusible interfacing. In this case, you’re best bet is mid to heavy weight sew in interfacing, but if the fabric is stiff enough, you might be able to skip the interfacing altogether. Hope that helps.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Ask A Question’ is closed to new topics and replies.