Reply To: Tips On Nice Fabric Cutouts 2.0

[the_professors_assistantKeymaster]

got it.   I agree with rdejam that an interfacing  would be a good idea.  You can try on a scrap and see if the reverse applique gives you the look you want (minus the fabric underneath) but still turning under the same way.  You can also, after you do your cut out, see if you can use a ribbon or trim to just fold over the raw edges of each cutout.  That way it’ll look finished with no fraying.  After you do the cutout, I would apply a little bit of fray check just so it doesn’t fray before you get to it.   I’m interested to see how you accomplish this so let us know what works best for you.