Home Page › Forums › Ask A Question › Bow tie troubleshooting › Reply To: Bow tie troubleshooting
July 22, 2014 at 2:16 PM
#31093
the_professors_assistant
Keymaster
hello! This is probably not your sewing but, instead, your bow tie is telling you that you need to trim your seam allowance more. Make sure that you’re cutting notches into the seam allowance and trimming some of the allowance off. If there’s too much seam allowance it’ll bunch up and pucker, especially in curved areas, when flipped right side out. I hope this works! 🙂