Book Promo Banner
Satin

Satin

Home Page Forums Ask A Question Satin

Tagged: , ,

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #9817
    the_professors_assistant
    Keymaster

    Can you wash and iron satin?

    #9818
    the_professors_assistant
    Keymaster

    You really have to look at the fabric bolt information label, which is found on the on end of the cardboard that the fabric is rolled on.  It really depends on the content of the satin.  Some could be made out of acetate, which would mean that it’s probably dry clean only.  Some satin may be 100% polyester which means it could be washable.  This sticker will give you all this information and if you want to see an example of how to find this information, you can take a look at this tutorial.  If you do press it, make sure you put it at the synthetic setting on your iron, which isn’t very hot.  You can also test a scrap piece to see how it reacts to your heat settings.  If you cannot get out wrinkles, you can also place your item in the bathroom while you shower and let the steam work it out.  If you don’t think you’ll remember the fabric bolt information, take a picture with your camera phone while at the fabric store.  Hope this helps.

    #9819
    the_professors_assistant
    Keymaster

    Most satin (even silk) is washable so assuming yours is, make sure you wash in cold water either by hand or on a gentle cycle in your washing machine and use a gentle soap like Woolite.  Don’t put it in the dryer regardless of the fabric content.  It will destroy the welt and luster.  Get as much water out using towels and let air dry preferably flat and not in the sun. If you need to iron it, make sure you use a dry iron with no steam using a low heat setting.   You should iron on the back (matte) side using a sheet or other piece of light fabric between the satin and your iron so you don’t iron directly on the fabric.  Move the iron around so you don’t leave it in any one place for any length of time.

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Ask A Question’ is closed to new topics and replies.